GE G60 Instruction Manual page 178

5.2 PRODUCT SETUP
Confirm RADIUS Confirmation of the shared secret. The
Authentication entry displays as asterisks.
(Shared) Secret
General Security Settings
SETTING NAME DESCRIPTION
Session Lockout Number of failed authentications before the
device blocks subsequent authentication
attempts for the lockout period
Session Lockout The period in minutes that a user is prevented
Period from logging in after being locked out
Syslog Server IP The IP address of the target Syslog server to
Address which all security events are transmitted
Syslog Server Port The UDP port number of the target syslog server
Number to which all security events are transmitted
Device When enabled, local device authentication with
Authentication roles is allowed. When disabled, the UR only
authenticates to the AAA server (RADIUS).
NOTE: Administrator and Supervisor (if still
enabled) remain active even after device
authentication is disabled. The only permission
for local Administrator is to re-enable device
authentication when device authentication is
disabled. To re-enable device authentication, the
Supervisor unlocks the device for setting
changes, and then the Administrator can re-
enable device authentication.
5
Firmware Locked Indicates if the device receives firmware
upgrades. If Yes and the firmware upgrade
attempt is made, the device denies the upgrade
and displays an error message that the lock is
set. On each firmware upgrade, this setting goes
back to the default.
Factory Service When enabled (checkbox selected), the device
Mode can go into factory service mode. To enable,
Supervisor authentication is necessary.
Restore to Defaults Sets the device to factory defaults
Supervisor role When enabled (checkbox selected), the
Supervisor role is active. To enable,
Administrator authentication is necessary. When
disabled, the Supervisor role is inactive. To
disable, Supervisor authentication is necessary.
RADIUS user Ensure that RADIUS user names are not the
names same as local/device role names
Password Local/device roles except for Observer are
password-protected. All RADIUS users are
password-protected.
5-18
See the 245 characters
following
password
section for
requirements
MIN
0 (lockout
disabled)
0 (no period) 9999
0.0.0.0
1
Disabled
No
Disabled
No
Disabled
See RADIUS
server
documents
See the
following
password
section for
requirements
G60 Generator Protection System
N/A -
MAX DEFAULT UNITS MINIMUM
PERMISSION
99 3 - Administrator
3 min Administrator
223.255. 0.0.0.0 - Administrator
255.254
65535 514 - Administrator
Enabled Enabled - Administrator
Yes Yes - Administrator
Enabled Disabled - Supervisor
(Administrator
when Supervisor
is disabled)
Yes No - Administrator
Enabled Enabled - Administrator to
enable and
Supervisor to
disable
See - Administrator
RADIUS
server
documents
See the Change Text The specified role
following Me1# and Administrator,
password except for
section for Supervisor, where
requireme it is only itself
nts
5 SETTINGS
Administrator
GE Multilin