9 APPLICATION OF SETTINGS
The following inputs and outputs will be used in this example. Make the following changes in EnerVista UR Setup or
through the
SETTINGS
INPUTS/OUTPUTS
Make the following changes in EnerVista UR Setup or through the
menus:
VIRTUAL OUTPUT 1(4)
Make the following changes in EnerVista UR Setup or through the
menus:
CONTACT OUTPUT H1(H4)
GE Multilin
CONTACT INPUTS
CONTACT INPUT H7a(H7c)
SETTINGS
SETTINGS
G60 Generator Protection System
9.1 SETTING EXAMPLE
9.1.13 INPUTS/OUTPUTS
menus:
INPUTS/OUTPUTS
VIRTUAL OUTPUTS
INPUTS/OUTPUTS
CONTACT OUTPUTS
9
9-11