[General Settings] - [Local Interface Settings]; [Tcp/Ip Settings] - [Tcp/Ip Settings]; [Tcp/Ip Settings] - [Ipv4 Settings] - Konica Minolta bizhub C3350 User Manual

1.5 Available operations in Administrator mode
Tips
-
If this machine is used as a wireless LAN access point, communications can only be established with
a computer and mobile terminal. In addition, up to five devices can be connected to this machine si-
multaneously.
- For the wireless network address when this machine is used as a wireless LAN access point, specify a
network address that is different from that of the backbone network. If the same network address is set
for both the wireless network and backbone network, a transmission from this machine to the backbone
network will be disabled.
- For details on the Wi-Fi Direct connection method, refer to the user' s guide of your terminal.

[General Settings] - [Local Interface Settings]

To display: Administrator mode - [Network] - [General Settings] - [Local Interface Settings]
Change the time-out time to limit a communication with the computer.
Item
[I/O Timeout]

[TCP/IP Settings] - [TCP/IP Settings]

To display: Administrator mode - [Network] - [TCP/IP Settings] - [TCP/IP Settings]
Configure the TCP/IP settings.
Item
[TCP/IP]
[LPD]
[SLP]
[LLMNR]

[TCP/IP Settings] - [IPv4 Settings]

To display: Administrator mode - [Network] - [TCP/IP Settings] - [IPv4 Settings]
Assign an IP address (IPv4) to this machine.
Item
[IP Address Setting
Method]
[IP Address]
[Subnet Mask]
[Default Gateway]
[Domain Name Auto-
matic Acquisition]
[DNS Server Automatic
Acquisition]
[Applied Functions]
Description
When this machine is connected via a USB device to the computer, change the
communication time-out time if necessary.
[60] sec. is specified by default.
Description
Select whether or not to use TCP/IP.
[Enable] is specified by default.
Select whether or not to use LPD (Line Printer Daemon).
[Enable] is specified by default.
Select whether or not to use SLP (Service Location Protocol).
[Enable] is specified by default.
Select whether or not to use LLMNR (Link-local Multicast Name Resolution).
[Enable] is specified by default.
Description
When automatically specifying the IP address, select the method for automatic
retrieval.
• [DHCP]: [ON] (selected) is specified by default.
• [BootP]: [OFF] (not selected) is specified by default.
• [ARP/PING]: [OFF] (not selected) is specified by default.
• [Auto IP]: Fixed to [ON] (selected).
When manually specifying the IP address, enter the fixed IP address.
When manually specifying the IP address, enter the subnet mask.
When manually specifying the IP address, enter the default gateway.
When using the DHCP or other protocols, select whether or not to automati-
cally retrieve the domain name.
[Enable] is specified by default.
Select whether or not to automatically obtain the address of the DNS server.
[Enable] is specified by default.
1
1-53