Installing The Drive Belt And Drive Sprocket - Yamaha XV1700PCRC Service Manual

DRIVE BELT AND DRIVE SPROCKET
4 - 91
3. Check:
• drive sprocket
• rear wheel pulley
Bent teeth → Replace the drive belt and
pulleys as a set.
INSTALLING THE DRIVE BELT AND DRIVE
SPROCKET
1. Install:
• drive sprocket 1
• lock washer 2
New
• drive sprocket nut 3
2. Install:
• drive belt
CAUTION:
_
Install the drive belt facing the same way it
was removed.
Do not twist the drive belt when installing
it.
3. Install:
• rear shock absorber and swingarm
assembly
Refer to "REAR SHOCK ABSORBER AND
SWINGARM".
• rear wheel
Refer to "REAR WHEEL, BRAKE DISC,
AND REAR WHEEL PULLEY".
4. Tighten:
• drive sprocket nut
100 Nm (10.0 m • kg, 72 ft • lb)
NOTE:
_
When tightening the drive sprocket nut, press
down on the brake pedal so the drive sprocket
does not move.
5. Bend the lock washer tab along a flat side of
the nut.
CHAS