Removal of PCDU Seals: MP C3004/C3504
• When you wind the lever, do not press it against the machine. If you do, the lever will not turn the
pin, and the pin will not come off.
Wind up the PCDU seal for Bk. Pull out the seals for Y, C, and M.
1.
Wind up the seal for K by winding the pin [B] counterclockwise using the winding lever
[A].
• Do not press the lever towards the machine when you wind it.
• Keep winding until the pin [B] is removed from PCDU. Discard the pin.
2.
Store the winding lever in the back of the image transfer front cover [A] as shown;
Main Machine Installation
81