Image Transfer Belt, Itb Cleaning Unit - Ricoh M022 Service Manual

Hide thumbs Also See for M022:

Table of Contents

7. Grasp the handles [A], and then pull out the ITB unit fully [B].

8. Grasp the handles [A], and then lift the ITB unit [B].

• If it takes much time to reinstall the ITB unit after removing it from the machine, close the paper

transfer unit to prevent the drum units from being exposed to light.

Image Transfer Belt, ITB Cleaning Unit

If you replace the TB cleaning unit, then you must reset the PM counter for this unit. To do this, set SP 3902

017 to 1 before you start to work on the machine.

• Do not touch or damage the surface of the image transfer belt during servicing.

1. ITB unit (

CÓPIA NÃO CONTROLADA

Image Transfer

Table of Contents

M024 M026 M028