Settings Relevant To The Service Contract - Ricoh MP C3004 Field Service Manual

2. Installation

Settings Relevant to the Service Contract

Change the necessary settings for the following SP modes if the customer has made a service contract.
SP No.
SP5-045-001
Counter method
SP5-104-001 (SSP)
A3/DLT double count
SP5-812-001 and
-002
Service Tel:
Telephone / Facsimile
Counter Display Method
There are 3 types (Developments, Prints and Coverage). Display mode can be set by SP5-045-001
(Accounting counter: Counter Method).
Value
0 Development Count
Print Count
1
(Default)
2 Coverage Count
100
Specifies if the counting method used in meter charge mode
is based on developments, prints, or coverage.
Specifies whether the counter is doubled for A3/DLT paper.
-001: shows or sets the telephone number of the service representative.
-002: shows or sets the fax number of the service station. The number is
printed on the counter list when the "Meter Click Charge" is enabled. User
can send a fax message with the counter list.
Mode
YMC Development Counter
Bk Development Counter
Color Copy Counter
B&W Copy Counter
Color Print Counter
B&W Print Counter
Color Total Counter
B&W Total Counter
Color Total Counter
B&W Total Counter
Color Coverage Counter 1
Color Coverage Counter 2
Color Coverage Counter 3
Function
Descriptions
Default
"1": Prints
"0":Single
counting