2. Installation
• In particular, do not lift the machine by holding the scanner unit, etc., because this may cause
the machine to deform.
• Do not put the machine down on the paper feed unit as a temporary resting place. This may
cause the paper feed unit to deform. Always connect the machine and paper feed unit
properly.
4.
Pull out the 2nd paper feed tray.
5.
Using a securing bracket as a screwdriver, fix the machine to the feed unit (spring
washer: screw: M4×10: 1).
6.
Attach the securing brackets [A] to two positions on the left and right at the rear of the
machine (screws: 1 each).
7.
Reattach the paper feed tray to the machine.
154