Grandstream Networks UCM6108 User Manual page 114

http://arttel.ru
Digit Timeout
Allow Hangup
Once successfully created, users can configure the inbound route destination as "DISA" or IVR key event
as "DISA". When dialing into DISA, users will be prompted with password first. After entering the correct
password, a second dial tone will be heard for the users to dial out.
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
setting is 10 seconds.
Configure the maximum amount of time permitted between digits when
the user is typing the extension. The default setting is 5 seconds.
If enabled, during an active call, users can enter the UCM6100 hangup
feature code (by default it's *0) to disconnect the call or hang up directly.
A new dial tone will be heard shortly for the user to make a new call. The
default setting is "No".
UCM6100 Series IP PBX User Manual Page 113 of 159