Internal Options/Jitter Buffer; Table 41: Internal Options/Jitter Buffer - Grandstream Networks UCM6108 User Manual

http://arttel.ru
Custom Name of Pickup Group

INTERNAL OPTIONS/JITTER BUFFER

SIP Jitter Buffer
Enable Jitter Buffer
Jitter Buffer Size
Max Jitter Buffer
Implementation
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
The default extension range assignment is:
User Extension: 5000-6299
x
Conference Extension: 6300-6399
x
IVR Extension: 7000-7100
x
Ring Group Extension: 6400-6499
x
Queue Extensions: 6500-6599
x
VoiceMail Group Extension: 6600-6699
x
Note:
It is recommended to keep the system assignment to avoid
inappropriate usage and unnecessary issues.
Configure the name for each pickup group. The pickup group list will
show up at the bottom of extension configuration dialog. Up to 10 pickup
groups can be supported on the UCM6100. By default the pickup group
name is using number from 1 to 10.

Table 41: Internal Options/Jitter Buffer

Select to enable jitter buffer on the sending side of the SIP channel. The
default setting is "No".
Configure the time (in ms) to buffer. This is the jitter buffer size used in
"Fixed" jitter buffer, or used as the initial time for "adaptive" jitter buffer.
The default setting is 100.
Configure the maximum time (in ms) to buffer for "Adaptive" jitter buffer
implementation, or used as the jitter buffer size for "Fixed" jitter buffer
implementation. The default setting is 200.
Configure the jitter buffer implementation on the sending side of a SIP
channel. The default setting is "Fixed".
Fixed
x
The size is always equal to the value of "Max Jitter Buffer".
Adaptive
x
The size is adjusted automatically and the maximum value equals to
the value of "Max Jitter Buffer".
UCM6100 Series IP PBX User Manual Page 123 of 159