Sip Settings/Debug; Table 54: Sip Settings/Debug - Grandstream Networks UCM6108 User Manual

http://arttel.ru
Server User Agent
Send Compact SIP Headers
Add "user=phone" to URI

SIP SETTINGS/DEBUG

SIP Debugging
Enable SIP Debugging
Record SIP History
Dump SIP History
Status Notifications (Subscriptions)
Subscribe Context
Allow Subscribe
Notify on Ringing
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
Configure the user agent string for the UCM6100.
If enabled, compact SIP headers will be sent. The default setting is "No".
If enabled, "user=phone" will be added to URI that contains a valid
phone number. The default setting is "No".

Table 54: SIP Settings/Debug

Select to enable SIP debugging. The default setting is "No".
Select to enable recording SIP history. The default setting is "No".
Select to enable dump SIP history at the end of SIP dialogue. The
default setting is "No".
Configure a specific context for SUBSCRIBE requests. This setting is
useful to limit subscriptions to local extensions. The default setting is
"from-internal".
Configure to allow subscriptions. The default setting is "Yes".
Configure to send out NOTIFY on ringing state. The default setting is
"Yes".
UCM6100 Series IP PBX User Manual Page 136 of 159