Getting Started; Use The Lcd Menu - Grandstream Networks UCM6108 User Manual

http://arttel.ru
The UCM6100 series provides LCD interface, LED indication and web GUI configuration interface.
The LCD displays hardware, software and network information. Users could also navigate in the LCD
x
menu for device information and basic network configuration.
The LED indication at the front of the device provides interface connection and activity status.
x
The web GUI gives users access to all the configurations and options for UCM6100 series setup.
x
This section provides step-by-step instructions on how to use the LCD menu, LED indicators and Web GUI
of the UCM6100 series. Once the basic settings are done, users could start making calls from UCM6100
extension registered on a SIP phone as described at the end of this section.

USE THE LCD MENU

Default LCD Display
x
By default, when the device is powered up, the LCD will show device model (e.g., UCM6116),
hardware version (e.g., V1.5A) and IP address. Press "Down" button and the system time will be
displayed as well.
Menu Access
x
Press "OK" button to start browsing menu options. Please see menu options in [
Options
Menu Navigation
x
Press the "Down" arrow key to browser different menu options. Press the "OK" button to select an
entry.
Exit
x
If "Back" option is available in the menu, select it to go back to the previous menu. For "Device Info"
"Network Info" and "Web Info" which do not have "Back" option, simply press the "OK" button to go
back to the previous menu. Also, the LCD will display default idle screen after staying in menu option
for 15 seconds.
LCD Backlight
x
The LCD backlight will be on upon key pressing. The backlight will go off after the LCD stays in idle for
30 seconds.
The following table shows the LCD menu options.
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102

GETTING STARTED

].
UCM6100 Series IP PBX User Manual
Table 4: LCD Menu
Page 22 of 159