Field
Secondary/Edge Port
Enable Status
display rrpp ring-group
Use display rrpp ring-group to display the RRPP ring group configuration.
Syntax
display rrpp ring-group [ ring-group-id ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor Level
Parameters
ring-group-id: RRPP ring group ID, which ranges from 1 to 8.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no ring group ID is specified, this command displays the configuration of all ring groups.
If an RRPP ring ID is specified, this command displays the configuration of the specified RRPP ring group
on the current device.
For an edge node RRPP ring group, this command also displays the subring sending Edge-Hello packets.
Examples
# Display the configuration of all RRPP ring groups.
<Sysname> display rrpp ring-group
Ring Group 1:
domain 1 ring 1 to 3, 5
domain 2 ring 1 to 3, 5
domain 1 ring 1 is the sending ring
Ring Group 2:
domain 1 ring 4, 6 to 7
Description
•
Secondary port when the node mode is master node or transit node.
•
Edge port when the node mode is edge node or assistant edge node.
•
A hyphen (-) appears when the port is not configured on the ring or the
board to which the port belongs does not start.
RRPP ring status:
•
Yes—Enabled.
•
No—Disabled.
66