Monitor-Link Group; Port - HP 7500 Series High Availability Command Reference

Field
Member
Role
Status

monitor-link group

Use monitor-link group to create a monitor link group and enter monitor link group view. If the specified
monitor link group already exists, this command directly leads you to monitor link group view.
Use undo monitor-link group to remove a monitor link group.
Syntax
monitor-link group group-id
undo monitor-link group group-id
Views
System view
Default command level
2: System level
Parameters
group-id: Monitor link group ID, which ranges from 1 to 16.
Examples
# Create monitor link group 1 and enter the view of monitor link group 1.
<Sysname> system-view
[Sysname] monitor-link group 1
[Sysname-mtlk-group1]
Related commands
•

port

port monitor-link group
•
port
Use port to assign a port to the monitor link group.
Use undo port to remove a port from the monitor link group.
Syntax
port interface-type interface-number { uplink | downlink }
undo port interface-type interface-number
Views
Monitor link group view
Default command level
2: System level
Description
Member ports of the monitor link group.
Port role, which can be uplink port or downlink port.
Member link state, which can be up or down.
95