HP 7500 Series High Availability Command Reference page 150

entry admin-name operation-tag: Specifies the NQA test group to be associated with the track entry.
admin-name is the name of the NQA test group administrator who creates the NQA operation, and is
a case-insensitive string of 1 to 32 characters. The operation-tag argument is the NQA operation tag, a
case-insensitive string of 1 to 32 characters.
reaction item-number: Specifies the reaction entry to be associated with the track entry. The item-number
argument is the reaction entry ID, which ranges from 1 to 10.
delay: Specifies that the track module notifies the application modules of the track entry status change
after a specific delay time. If this keyword is not specified, the track module immediately notifies the
application modules when the track entry status changes.
negative negative-time: Specifies the delay time for the track module to notify the application modules
that the status of the track entry has changed to Negative. The negative-time argument represents the
delay time, in the range of 1 to 300, in seconds.
positive positive-time: Specifies the delay time for the track module to notify the application modules that
the status of the track entry has changed to Positive. The positive-time argument represents the delay time,
in the range of 1 to 300, in seconds.
Usage guidelines
After a track entry is created, you cannot change its settings except the delay time. To change the delay
time, use the track nqa delay command. To modify other settings of this track entry, first delete the entire
track entry, and then create a new track entry.
Examples
# Create track entry 1, and associate it with reaction entry 3 of the NQA test group (admin-test).
<Sysname> system-view
[Sysname] track 1 nqa entry admin test reaction 3
Related commands
display track
•
• nqa
reaction (Network Management and Monitoring Command Reference)
•
144