HP 7500 Series High Availability Command Reference page 77

Usage guidelines
If an RRPP ring ID is specified, this command displays the detailed information about the specified ring
in the specified RRPP domain. Otherwise, this command displays the detailed information about all the
rings in the specified RRPP domain.
Examples
# Display the detailed information about ring 1 in RRPP domain 1.
<Sysname> display rrpp verbose domain 1 ring 1
Domain ID
Control VLAN
Protected VLAN: Reference Instance 0 to 2, 4
Hello Timer
Fast Detection Status: Disable
Fast Hello Timer: 100 ms
Ring ID
Ring Level
Node Mode
Ring State
Enable Status : Yes
Primary port
Secondary port: GE1/0/2
# Display the detailed information about all the rings in RRPP domain 2.
<Sysname> display rrpp verbose domain 2
Domain ID
Control VLAN
Protected VLAN: Reference Instance 3, 5 to 7
Hello Timer
Fast Detection Status: Disable
Fast Hello Timer: 100 ms
Ring ID
Ring Level
Node Mode
Ring State
Enable Status : Yes
Primary port
Secondary port: GE1/0/5
Ring ID
Ring Level
Node Mode
Ring State
Enable Status : No
Common port
Edge port
: 1
: Major 5 Sub 6
: 1 sec Fail Timer : 3
Fast Fail Timer: 300 ms
: 1
: 1
: Master
: Complete
Active Status: Yes
: GE1/0/1
: 2
: Major 10 Sub 11
: 1 sec Fail Timer : 3
Fast Fail Timer: 300 ms
: 1
: 0
: Master
: Complete
Active Status: Yes
: GE1/0/4
: 2
: 1
: Edge
: -
Active Status: No
: GE1/0/4
GE1/0/5
: GE1/0/3
sec
Port status: UP
Port status: BLOCKED
sec
Port status: UP
Port status: BLOCKED
Port status: -
Port status: -
Port status: -
71