Ethernet Oam Configuration Commands; Display Oam - HP 7500 Series High Availability Command Reference

Ethernet OAM configuration commands

display oam

Use display oam to display information about an Ethernet OAM connection, including connection status,
information contained in Ethernet OAM packet header, and Ethernet OAM packet statistics.
Syntax
display oam { local | remote } [ interface interface-type interface-number ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
local: Displays the Ethernet OAM connection information of the local end.
remote: Displays the Ethernet OAM connection information of the remote end.
interface interface-type interface-number: Specifies a port by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify the interface keyword, this command displays information about all Ethernet OAM
connections.
Examples
# Display information about the Ethernet OAM connection established on the local port GigabitEthernet
1/0/1.
<Sysname> display oam local interface gigabitethernet 1/0/1
Port
Link Status : Up
EnableStatus
Local_oam_mode
Local_mux_action
OAMLocalFlagsField :
--------------------------------------------------------------------------
Link Fault
: GigabitEthernet1/0/1
: Enable
: Active
: FWD
: 0
Local_pdu
Local_par_action
Dying Gasp
6
: ANY
: FWD
: 0