Port Monitor-Link Group - HP 7500 Series High Availability Command Reference

Parameters
interface-type interface-number: Specifies a port by its type and number.
uplink: Specifies an uplink port.
downlink: Specifies a downlink port.
Usage guidelines
You can assign Layer 2 Ethernet interfaces or Layer 2 aggregate interfaces to a monitor link group as
member ports.
You can assign a port to only one monitor link group.
You can assign a port to a monitor link group by using the port monitor-link group command in Layer 2
Ethernet interface view or Layer 2 aggregate interface view.
Examples
# Create monitor link group 1, and configure GigabitEthernet 1/0/1 as an uplink port and
GigabitEthernet 1/0/2 as a downlink port for monitor link group 1.
<Sysname> system-view
[Sysname] monitor-link group 1
[Sysname-mtlk-group1] port gigabitethernet 1/0/1 uplink
[Sysname-mtlk-group1] port gigabitethernet 1/0/2 downlink
Related commands

port monitor-link group

port monitor-link group
Use port monitor-link group to assign the current port to a monitor link group as a member port.
Use undo port monitor-link group to remove the current port from a monitor link group.
Syntax
port monitor-link group group-id { uplink | downlink }
undo port monitor-link group group-id
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Default command level
2: System level
Parameters
group-id: Monitor link group ID, which ranges from 1 to 16.
uplink: Specifies an uplink port.
downlink: Specifies a downlink port.
Usage guidelines
You can assign a port to only one monitor link group.
You can assign a port to a monitor link group with the port command in monitor link group view.
96