HP 7500 Series High Availability Command Reference page 52

SendLTR: 0
No CCM from some remote MEPs is received.
One or more streams of error CCMs is received. The last-received CCM:
Maintenance domain: (Without Name)
Maintenance association:matest1
MEP:5 Sequence Number:0x50A
Received Time: 02/3/6 13:01:34
One or more streams of cross-connect CCMs is received. The last-received CCM:
Maintenance domain:mdtest1
Maintenance association:matest1
MEP:6 Sequence Number:0x63A
Received Time: 02/3/6 13:01:34
Some other MEPs are transmitting the RDI bit.
Table 16 Command output
Field
Interface
Maintenance domain
Maintenance association
Level
VLAN
Direction
Administrative state
CCM send
FNG state
CCM
Current state
Interval
SendCCM
ReceiveLTM: 0
Description
Interface to which an MD belongs.
MD to which a MEP belongs. (If the MD does not have a name, this field is
displayed as Without Name.)
MA to which a MEP belongs.
Level of the MD.
VLAN to which the MA belongs.
Direction of the MEPs.
State of MEP, either Active or Inactive.
Whether the MEP sends CCM.
State of FNG (Fault Notification Generator):
•
FNG_RESET.
•
FNG_DEFECT.
•
FNG_REPORT_DEFECT.
•
FNG_DEFECT_REPORTED.
•
FNG_DEFECT_CLEARING.
If this field is not supported, a hyphen (-) is displayed.
Information related to CCM.
State of CCMs sent:
•
CCI_IDLE.
•
CCI_WAITING.
If this field is not supported, a hyphen (-) is displayed.
Interval to send CCM.
Number of CCMs that have been sent by the MEPs.
If this field is not supported, a hyphen (-) is displayed.
46