HP 7500 Series High Availability Command Reference page 105

Examples
# When VRRP operates in standard mode, display brief information about all VRRP groups on the device.
<Sysname> display vrrp
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface
---------------------------------------------------------------------
Vlan2
Table 30 Command output (standard mode)
Field
Run Mode
Run Method
Total number of virtual routers
Interface
VRID
Run Pri
Adver. Timer
Auth Type
Virtual IP
# When VRRP operates in standard mode, display detailed information about all VRRP groups.
<Sysname> display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
: Standard
: Virtual MAC
VRID State
1 Master
Description
Current VRRP operation mode. Standard represents standard mode.
Current VRRP running mode:
•
Real MAC—Real MAC mode. The virtual IP address of the VRRP group is
mapped to the real MAC address of the interface.
•
Virtual MAC—Virtual MAC mode. The virtual IP address of the VRRP
group is mapped to the virtual MAC address.
Number of VRRP groups.
Interface to which the VRRP group belongs.
ID of the VRRP group.
Running priority of the router (current priority of the router). With VRRP
tracking configured, the priority of the router changes when the state of the
monitored interface or track entry changes.
VRRP advertisement interval, in seconds.
Authentication type:
•
None—No authentication.
•
Simple—Simple authentication.
•
MD5—MD5 authentication.
Virtual IP address of the VRRP group.
: Standard
: Virtual MAC
: 1 Adver Timer
: Up State
: 150 Running Pri
: Yes Delay Time
: Simple Key
: 1.1.1.1
99
Run Adver Auth
Pri Timer Type
140 1 Simple
: 1
: Master
: 140
: 5
: ******
Virtual
IP
1.1.1.1