Dldp Reset - HP 7500 Series High Availability Command Reference

Hide thumbs Also See for 7500 Series:
Table of Contents

Advertisement

Syntax
dldp interval time
undo dldp interval
Default
The interval for sending Advertisement packets is 5 seconds.
Views
System view
Default command level
2: System level
Parameters
time: Interval for sending Advertisement packets, in the range of 1 to 100 (in seconds).
Usage guidelines
This command applies to all DLDP-enabled ports.
Examples
# Set the interval for sending Advertisement packets to 20 seconds.
<Sysname> system-view
[Sysname] dldp interval 20

dldp reset

Use dldp reset to reset DLDP state for ports, thus enabling DLDP down ports to perform unidirectional link
detection.
Syntax
dldp reset
Views
System view, Layer 2 Ethernet interface view, port group view
Default command level
2: System level
Usage guidelines
When executed in system view, this command applies to all ports of the device. When executed in Layer
2 Ethernet interface view, this command applies to the current port. When executed in port group view,
this command applies to all ports in the port group.
Examples
# Reset DLDP state for all ports.
<Sysname> system-view
[Sysname] dldp reset
# Reset DLDP state for port GigabitEthernet 1/0/49.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/49
[Sysname-GigabitEthernet1/0/49] dldp reset
60

Advertisement

Table of Contents
loading

Table of Contents