Timer - HP 7500 Series High Availability Command Reference

undo rrpp ring-group ring-group-id
Views
System view
Default command level
2: System level
Parameters
ring-group-id: RRPP ring group ID, which ranges from 1 to 8.
Usage guidelines
RRPP configured with ring groups cannot interoperate with RRPP that does not support ring group
configuration.
When you remove a ring group, remove it from the edge node first and then from the assistant-edge node.
If you fail to follow the order, the assistant-edge node will fail to receive Edge-Hello packets and
mistakenly considers that the primary ring has failed.
After a ring group is removed, all subrings in the ring group do not belong to any ring group.
Examples
# Create RRPP ring group 1 and enter its view.
<Sysname> system-view
[Sysname] rrpp ring-group 1
[Sysname-rrpp-ring-group1]
Related commands
• domain ring
display rrpp ring-group
•

timer

Use timer to configure the Hello timer value and the Fail timer value for the RRPP domain.
Use undo timer to restore it to the default value.
Syntax
timer hello-timer hello-value fail-timer fail-value
undo timer
Default
The Hello timer value is 1 second and the Fail timer value is 3 seconds.
Views
RRPP domain view
Default command level
2: System level
Parameters
hello-value: Hello timer value, which ranges from 1 to 10 seconds.
fail-value: Fail timer value, which ranges from 3 to 30 seconds.
81