Display Cfd Service-Instance - HP 7500 Series High Availability Command Reference

Field
MAC Status

display cfd service-instance

Use display cfd service-instance to display the configuration information for a service instance.
Syntax
display cfd service-instance [ instance-id ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
instance-id: Service instance ID, ranging from 1 to 32767.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no service instance ID is specified, the command displays the configuration information for all service
instances.
Examples
# Display the configuration information for all service instances.
<Sysname> display cfd service-instance
2 service instance(s) configured:
Service instance 5:
Maintenance domain: mdtest_5
Maintenance association: matest_5
Level: 5
Description
State of the port indicated by the last CCM received from the remote MEP:
•
UP—The interface is ready to pass packets.
•
DOWN—The interface cannot pass packets.
•
TESTING—The interface is in some test mode.
•
UNKNOWN—The interface status cannot be determined for some reason.
•
DORMANT—The interface is not in a state to pass packets but is in a
pending state, waiting for some external event.
•
NOT-PRESENT—Some component of the interface is missing.
•
LLD—The interface is down because of the state of the lower layer
interfaces.
If this field is not supported, a hyphen (-) is displayed.
VLAN: 5 MIP rule: None CCM interval: 1s
51