Track Configuration Commands; Display Track - HP 7500 Series High Availability Command Reference

Track configuration commands

display track

Use display track to display track entry information.
Syntax
display track { track-entry-number | all } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
track-entry-number: Displays information about the specified track entry, which ranges from 1 to 1024.
all: Displays information about all track entries.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about all track entries.
<Sysname> display track all
Track ID: 1
Status: Positive (notify 13 seconds later)
Duration: 0 days 0 hours 0 minutes 7 seconds
Notification delay: Positive 20, Negative 30 (in seconds)
Reference object:
NQA entry: admin test
Reaction: 10
Track ID: 2
Status: Invalid
Duration: 0 days 0 hours 0 minutes 32 seconds
Notification delay: Positive 20, Negative 30 (in seconds)
Reference object:
BFD session:
Packet type: Echo
Interface
Remote IP
Local IP
: Vlan-interface2
: 192.168.40.1
: 192.168.40.2
138