Critical Event
Remote Evaluating
Packets statistic :
Packets
--------------------------------------------------------------------------
OAMPDU
OAMInformation
OAMEventNotification
OAMUniqueEventNotification
OAMDuplicateEventNotification
Table 3 Command output
Field
Port
Link Status
EnableStatus
Local_oam_mode
Local_pdu
Local_mux_action
Local_par_action
OAMLocalFlagsField
Link Fault
Dying Gasp
Critical Event
Local Evaluating
: 0
Local Evaluating
: COMPLETE
Send
645
645
0
--
--
Description
Port index.
Link status (up or down).
Ethernet OAM state (enabled or disabled).
Local Ethernet OAM mode:
•
Active—The port is operating in active Ethernet OAM mode.
•
Passive—The port is operating in passive Ethernet OAM mode.
The way in which the local end processes Ethernet OAMPDUs:
•
RX_INFO—The port only receives Information OAMPDUs and does not
send any Ethernet OAMPDUs.
•
LF_INFO—The port only sends the Information OAMPDUs without
Information TLV triplets and with their link error flag bits being set.
•
INFO—The port sends and receives only Information OAMPDUs.
•
ANY—The port sends and receives Ethernet OAMPDUs of any type.
Working mode of the local transmitter:
•
FWD—The port can send any packets.
•
DISCARD—The port only sends Ethernet OAMPDUs.
Working mode of the local receiver:
•
FWD—The port can receive any packets.
•
DISCARD—The port only receives Ethernet OAMPDUs.
Local flags inserted in the local flag fields of the Ethernet OAMPDUs sent.
Indicates whether an Ethernet OAM link error is present: 0 for no and 1 for
yes.
Indicates whether a fatal error is present: 0 for no and 1 for yes.
Indicates whether a critical error is present: 0 for no and 1 for yes.
Indicates whether the local-to-remote configuration negotiation is complete:
•
COMPLETE—The negotiation is completed.
•
NOTCOMPLETE—The negotiation is uncompleted.
7
: COMPLETE
Receive
648
648
--
0
0