HP 7500 Series High Availability Command Reference page 141

Source IP: 192.168.11.11
Session State: Up
Min Trans Inter: 200ms
Min Recv Inter: 200ms
Running Up for: 00:02:36
Connect Type: Direct
Protocol: OSPF/RSVP/MFW
Diag Info: No Diagnostic
Local Discr: 2
Source IP: 192.168.12.11
Session State: Up
Min Trans Inter: 200ms
Min Recv Inter: 200ms
Running Up for: 00:02:36
Connect Type: Direct
Protocol: OSPF/RSVP/MFW
Diag Info: No Diagnostic
# Display detailed information about the BFD sessions maintained by slot 3 on chassis 1. (In IRF mode)
<Sysname> display bfd session chassis 1 slot 3 verbose
IPv4 session working under Ctrl mode:
Local Discr: 1
Source IP: 192.168.11.11
Session State: Up
Min Trans Inter: 200ms
Min Recv Inter: 200ms
Recv Pkt Num: 16927
Hold Time: 1900ms
Connect Type: Direct
Protocol: OSPF/RSVP/MFW
Diag Info: No Diagnostic
Table 37 Command output
Field
Total session number
Up session number
Init mode
session working under xx mode
Local Discr
Remote Discr
Source IP
Destination IP: 192.168.11.10
Interface: Vlan-interface1
Act Trans Inter: 200ms
Act Detect Inter: 1000ms
Auth mode: None
Board Num: 6
Remote Discr: 2
Destination IP: 192.168.12.10
Interface: Vlan-interface2
Act Trans Inter: 600ms
Act Detect Inter: 1000ms
Auth mode: None
Board Num: 7
Remote Discr: 1
Destination IP: 192.168.11.10
Interface: Vlan-interface1
Act Trans Inter: 600ms
Act Detect Inter: 1000ms
Send Pkt Num: 17146
Auth mode: None
Chassis/Board Num: 1/3
Description
Total number of BFD sessions.
Total number of active BFD sessions.
BFD operating mode, active or passive.
IPv4/IPv6 BFD session mode:
•
Ctrl—Control packet mode.
•
Echo—Echo packet mode.
Local ID of the session.
Remote ID of the session.
Source IP address of the session.
135