Bodywork
Side fairings
The following operations only refer to one fairing,
but they apply to both.
•
Rest the vehicle on its stand.
•
Remove the side fairing.
•
Unscrew and remove the two screws
(1) and collect the corresponding
washers.
•
Unscrew and remove the screw (2) and
collect the washer.
•
Remove the rivet (3).
•
Working on the front side of the vehicle,
remove the three rivets (4).
•
Loosen and remove the screw (5).
•
Sliding it off the fixing tongues (6) and
paying attention to the integrity of the
plastic parts, remove the fairing.
License plate holder
•
Remove the passenger saddle.
•
Remove the lower licence plate sup-
port cover.
•
Unscrew and remove the central lower
screw.
BODYW - 212
RS4 50 MY2011