RS4 50 MY2011
•
Screw the cap on the sleeve
Installing the fork legs
The following operations are described for the Paioli fork, but are identical for the operation with
the fork model Mingxing, except where specified.
•
Insert the sleeve together with the
wheel holder stem on the lower and
upper plates.
•
Insert the wheel pin through both
stems to align the holes.
•
Insert the stems holding pipe on the lower plate, in the clamps of the front headlamp and on
the upper plate.
•
Insert the wheel pin through both sheaths to align the holes.
•
Align the end of the upper plate to the
top of the holding pipes (except the
plug).
•
Provisionally tighten the screw that
locks the upper plate on the holding
pipes.
Suspensions
SUSP - 161