RS4 50 MY2011
Installing
•
Place the complete calliper on the spe-
cific lodging on the swingarm.
•
Connect the drive chain after position-
ing the wheel and insert the retaining
pin
•
Insert the washer, the nut and fix the
pin at the prescribed torque
•
Connect the braking system line to the
calliper and proceed with bleeding.
Front brake calliper
CAUTION
THE MOTORCYCLE MAY BE FITTED WITH AN A.J.P. OR A J.JUAN BRAKING SYSTEM.
THE PROCEDURES FOR REMOVING AND INSTALLING THE BRAKE CALLIPER ARE IDENTICAL
key:
A) A.J.P. Brake calliper
B) J.JUAN Brake calliper
Removal
•
Carry out the drainage of the front braking system.
•
Unscrew the screw (1) and slide off the brake oil pipe.
Braking system
BRAK SYS - 181