Table of Contents
Advertisement
RS4 50 MY2011
Engine
- Fit the star washer
- Fit the disc thrust plate, the bevelled washer and
the fixing nut
- Lock the plate with the specific tool and tighten
the fixing nut
- Fold the locking washer to secure the nut
Specific tooling
00H0530004.1 Clutch locking tool
- Lubricate the clutch plates with new oil
- Fit the plates with the visible mark on one of the
friction surfaces facing out
- Be careful with the trim driver discs alignment that
must have the lubrication channels facing in the
opposite direction to the rotation.
- Fit the clutch springs and their fixing screws
- Tighten to the specified torque
Locking torques (N*m)
Clutch spring screws
9 Nm (6.64 lbf ft)
ENG - 115
Advertisement
Table of Contents
