RS4 50 MY2011
Checking the clutch housing
Carry out a visual inspection of the clutch jaws.
Replace the component if there are signs of ther-
mal fatigue, reduced surface hardness or irregular
jaw wear.
Check the components of the clutch bell are in
good conditions:
- Clutch plate seats
- Rivets and connecting plugs to crown gears
- Main shaft lever coupling
CAUTION
REPLACE THE PART IN CASE OF UNDUE DAMAGE.
Checking the pusher plate
Check the disc thrust plate and its axial bearing.
CAUTION
REPLACE THE PART IN CASE OF UNDUE DAMAGE.
Checking the clutch hub
Check that the disc holding plate is in good condi-
tions.
Check that the coupling between the surface and
the plate is not eroded or grooved. Replace the
part if any defect is found.
CAUTION
REPLACE THE PART IN CASE OF UNDUE DAMAGE.
Engine
ENG - 113