RS4 50 MY2011
•
Unscrew and remove both screws fix-
ing from the radiator to the chassis.
•
Sliding it off the fitting slots, remove the
radiator.
Radiator installation
•
Install the radiator following the removal operations but in reverse order.
•
Fill the coolant tank with the recommended product.
•
Check that the system does not show leaks.
Removing the expansion tank
•
Remove the left side fairing and drain
off the coolant.
•
Lift the tank and fasten it in position
with the supplied supporting stem.
•
Release and remove the clamp and
slide off the hoses.
•
During the refit, fit a new clamp, of the
same type.
Cooling system
COOL SYS - 199