Removing The Clutch Cover - APRILIA RS4 50 2011 Workshop Manual

Engine
pos. Description
1 Cover retainer
pos. Description
1 Clutch housing retainer
2 Clutch spring retainer

Removing the clutch cover

- Remove the oil pump
- Remove the clutch cover undoing the eight
screws indicated in the figure
- Remove the clutch cover bolts
NOTE
THE START-UP PEDAL SHAFT SHOULD REMAIN ON THE
ENGINE UNIT WHILE THE CLUTCH COVER IS TAKEN OUT.
See also
Removing
ENG - 110
C
LUTCH COVER
Type Quantity
M6x110 7 8-10 Nm (5.90-7.38 lbf
C
LUTCH
Type Quantity
M12 1 35-45 Nm (28.81-33.19
M5x80 5 3.5-4.5 Nm (2.58-3.31
RS4 50 MY2011
Torque Note
-
ft)
Torque Note
-
lbf ft)
-
lbf ft)