APRILIA RS4 50 2011 Workshop Manual page 148

Suspensions
Wheel axle bending limit (1):
0.2 mm
TYRES
•
Check the tyres for wear; If they are
damaged, replace them.
WHEEL RIMS
•
Check the wheel deformation.
•
If there are bends or damages, replace
it.
•
Check the wheel deformation limits.
Radial limit (a): 0.6 mm
Lateral limit (b): 0.5 mm
•
If the measured values exceed the lim-
it, replace the wheel rim.
•
Check wheel bearings.
NOTE
BEARINGS MUST ROTATE FREELY, WITHOUT JAMMING
AND/OR NOISE, OTHERWISE, THEY NEED TO BE RE-
PLACED.
SUSP - 148
RS4 50 MY2011