RS4 50 MY2011
•
Unscrew and remove the wheel axle
fixing nut and collect the washer.
•
Loosen the lock screw of the calliper
mounting bracket.
•
Extracting the wheel, slide off the pin
from the right side of the vehicle, pay-
ing attention to the speed sensor collar.
•
Remove the front wheel.
Checking the front wheel
WHEEL INSPECTION
NOTE
BALANCE THE WHEEL, IF A TYRE OR A WHEEL WAS REPLACED.
WARNING
WHEEL RIM REPAIRS MUST NOT BE CARRIED OUT.
•
Check the wheel axle by turning the
wheel rim on a flat surface.
•
If there are bends, replace it.
WARNING
NEVER TRY TO STRAIGHTEN THE BEND AXLE.
Suspensions
SUSP - 147