RS4 50 MY2011
•
Tighten the two screws on the front
headlamp clamp.
•
Fasten the brake piping to the left
sheath.
•
Slide off the wheel axle.
•
Mount the front wheel.
•
Fit the front brake calliper and tighten the two fixing screws.
See also
Removing the
front wheel
Removal
•
Lower the hoist arm.
CAUTION
BEFORE RELEASING THE BELTS MAKE SURE THAT THE OPTIONAL REAR SERVICE STAND
IS ADEQUATELY POSITIONED.
•
Correctly fit the lower shield, the mudguard, the front wheel, the brake callipers.
•
Release the belts from the chassis.
•
Check the proper fork operation by operating on the front brake and pushing repeatedly on
the fork.
•
The brake should operate progressively and there should be no oil marks on the stems.
CAUTION
BEFORE RIDING, CHECK THAT THE VEHICLE IS CORRECTLY SET.
Rear
Removing the rear wheel
Suspensions
SUSP - 163