Position Engine Ground - APRILIA RS4 50 2011 Workshop Manual

RS4 50 MY2011
Electrical system
TABLE E4
If by mistake the resistance (899436) is not well
inserted or does not start correctly, the instrument
panel will not signal the end of the Mix oil and could
cause the engine failure.
17. Clamps
18. Frame assembly
19. Towards engine ground
20. CAUTION: see CENTRAL SECTION, TABLE
D
21. Connection
22. CAUTION: Check carefully if the connec-
tion has been carried out and if there are pins
slide off. Signal with a permanent marker after
having made the control. CAN CAUSE THE EN-
GINE SEIZURE.
23. Main cable harness
24. If this is the resistance, put on the clamp
TABLE F - Position engine ground
24. Towards chassis ground
25. Towards main cable harness
26. Engine ground
ELE SYS - 71