Table of Contents
Advertisement
RS4 50 MY2011
pos.
Description
1
TCEI screw
2
TCEI screw
3
TCEI screw
4
TE screw
5
TE screw
Vehicle preparation
•
Place the vehicle on its OPTIONAL front service stand.
•
Support the vehicle rear part using belts and hoist.
•
Drain off the cooling system.
•
Beforehand, remove the lug, the side fairings, the battery, the fuel tank, the side fairings,
the drive chain, the mixer oil tank, the air filter box, the carburettor.
•
Position an under-sump stand that will be supported on the lower side of the engine.
See also
Removing the
radiator
Lower cowl
Side fairings
Fuel tank
Drive chain
Mixture oil
tank
Air box
CHASSIS
Type
Quantity
M8x16
2
15 Nm (11.06 lbf ft)
M8
2
25 Nm (18.43 lbf ft)
M10x45
4
50 Nm (36.88 lbf ft)
M8x40
2
25 Nm (18.43 lbf ft)
M6x16
2
Engine from vehicle
Torque
12 Nm (8.85 lbf ft)
Loctite 243
ENG VE - 89
Notes
-
-
-
-
Advertisement
Table of Contents
