Removing The Drive Chain - APRILIA RS 50 Workshop Manual

Cycle Parts

REMOVING THE DRIVE CHAIN

Carefully read the PERIODIC MAINTENANCE
SCHEDULE and the section PRECAUTIONS AND
GENERAL INFORMATION.
Place the vehicle on the rear stand
VEHICLE ON THE REAR STAND OPT).
Rear stand: 8705021.
CAUTION
Before removing the drive chain, ensure that the
gears are in neutral. Mind your hands!
Using a wedge (e.g. the blade of a screwdriver),
remove clip (1) from the joining link.
Collect joining link (2).
Remove drive chain (3) towards the rear of the vehi-
cle.
WARNING
When refitting drive chain (3), ensure that joining
link clip (1) is fitted with the open end facing away
from the direction of motion (see figure).
WARNING
An excessive slackening of the chain can cause it
to come off of the sprockets, which often results
in accidents or serious damage to the vehicle.
Periodically check the slack and adjust it if neces-
sary, see (ADJUSTMENT).
CAUTION
Incorrect maintenance may cause the untimely
wear of the chain and/or damages to the pinion
and/or the crown.
Carry out the maintenance operations more
frequently if you use the vehicle in difficult condi-
tions or on dusty and/or muddy roads.
7-68
(PLACING THE
Release 00 2000-11
2
2
1
chap. 7
RS 50
3