Suspensions
•
Place a stand under the tyre to keep
the wheel in position once it is free.
•
Slide off the wheel pin from the left
side.
•
Collect the spacer from the left side.
•
Remove the wheel by sliding it off from the front.
Checking the front wheel
CAUTION
CHECK THAT ALL THE PARTS ARE IN GOOD CONDITIONS, ESPECIALLY THOSE MENTIONED
BELOW.
BEARINGS
Turn the internal ring manually; it must rotate
smoothly, continuously and silently.
There must be no axial clearance.
The bearings presenting these problems must be
replaced.
GASKETS
Check that the gaskets are in good conditions; replace them if they show signs of damage or excessive
wear.
SUSP - 142
RX SX 125