System Mode; Operation Panel - Toshiba B-EX4 Maintenance Manual

5. SYSTEM MODE

5. SYSTEM MODE
The system mode can be entered by the following procedure from printer power off condition.
•
Press [FEED] key and [PAUSE] key at the same time
•
Press [MODE] Key
In this mode, the printer self-test operation and parameter setting operation are performed.
When displaying top menu, main firmware version is shown at right side of title.
The language displayed on the panel is Japanese if Japanese is selected by language setting and English if
English, German, French, Dutch, Spanish, Italian or Portuguese is selected.

5.1 OPERATION PANEL

The figure below illustrates the Operation Panel and key functions.
The figure below illustrates the Operation Panel and key functions.
ONLINE LED
FEED key
MODE key
LEFT key
CANCEL key
The LCD Message Display shows messages in alphanumeric characters and symbols to indicate the
printer's status. Up to 16 characters in 2 lines can be displayed.
There are three LEDs on the Operation Panel.
LED
POWER The printer is turned on.
ON LINE The printer is ready to print.
ERROR Any error occurs with the printer.
DOWN key
Illuminates when...
5-1
EO18-33027
5.1 OPERATION PANEL
Graphic LCD
ERROR LED
PAUSE key
RESTART key
UP key
RIGHT key
ENTER key