Toshiba B-EX4 Maintenance Manual page 66

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4. Disconnect the Ribbon End Sensor Harness from the Ribbon End Sensor.
Ribbon End Sensor Harness
5. Separate the Sensor PCB from the Sensor Frame.
Sensor PCB
6. Fit the Sensor PCB into the Ribbon Guide.
Ribbon Guide
7. Connect the Ribbon End Sensor Harness to the Sensor PCB.
Ribbon End Sensor Harness
Sensor PCB
4.10 UHF RFID KIT (B-EX700-RFID-U2-US/EU/CN-R)
Ribbon End Sensor
Sensor Frame
4-51
EO18-33027
(Revision Date: Aug. 24, 2011)
Sensor PCB
Ribbon Guide