Toshiba B-EX4 Maintenance Manual page 160

5. SYSTEM MODE
This is a issue retry number after printing error pattern (void pattern) automatically when RFID write
error occur. Printer stop as RFID write error if RFID write does not success after retrying this number.
Max. Min.
255 0
It sets reading retry count and reading retry time.
The printer retries to read the data in the RFID tag for up to specified number of times. If the time-out
has come before the maximum number retries have been done, the printer stops the retries at the time.
Whenever the printer writes data onto the RFID tag, the tag is read first. The maximum number of
retries set by this parameter becomes also effective in this pre-read.
Max. Min.
255 0
Set the time-out for retry to read the RFID tag.
If the printer has retried for the maxim number of times within the RFID read retry time-out, the printer
stops the retries at the time.
Whenever the printer writes data onto the RFID tag, the tag is read first. The read retry time-out set by
this parameter becomes also effective in this pre-read.
Max. Min.
9.9 0.0
5.11.3.2 Issue retry label / ISSUE RETRY LABLES
Step Display
1 Decimal
5.11.3.3 Read retry / READ RETRY
Step Display
1 Decimal
Step Display
0.1 Decimal
Sign Integer Decimal
digit
Non 3
Sign Integer Decimal
digit
Non 3
Sign Integer Decimal
digit
Non 1
5-78
5.11 RFID Module Setting
0 fullfil
point
digit
0 Non
0 fullfil
point
digit
0 Non
0 fullfil
point
digit
1 Non second
EO18-33027
Unit
Labels
Unit
times
Unit