Toshiba B-EX4 Maintenance Manual page 206

11. RFID ANALYZE TOOL
5. Perform a write test or read test.
Write test
Click on the "Write Test" button to start a write test.
During the write test, total number of successful write and total number of write performed are shown in
the status bar. In the text box above the status bar, status data sent from the RFID module is displayed.
When the test is completed, all test results are shown in the "Results" box.
Read test
Click on the "Read Test" button to start a read test.
During the read test, total number of successful read and total number of read performed are shown in
the status bar. In the text box above the status bar, status data sent from the RFID module is displayed.
When the test is completed, all test results are shown in the "Results" box.
Example
(U2 module)
Results box
Text box
Status bar
Write/Read Results Box (When U2 is selected.)
amount
Feed
Power Level
11- 19
All read or write
test results
<AGC Level 00> AGC 1
<AGC Level 00> AGC 2
<AGC Level 00> AGC 3
<AGC Level 00> AGC 4
<AGC Level 00> AGC 5
Number of times data read succeeded/Total
number of read performed
EPC Code (displayed only when a read test is
performed. )
EO18-33027
11.4 Operating Procedure
Write Test
button
Read Test
button
Status
Data
st
data: Rank 00 level
nd
data: Rank 00 level
rd
data: Rank 00 level
th
data: Rank 00 level
th
data: Rank 00 level