Toshiba B-EX4 Maintenance Manual page 176

6. ON LINE MODE
The icon types to indicate judgement in judgement result display of threshold setting are below.
No. Display
（English）
1
2
3
4
5
6
example Icon name
OK(Mid.)
OK (High)
OK (Low)
NG （1）
NG （1）
NG （2）
Explanation
・Available to detect by paper sensor. Threshold
value is middle.
・Available to detect by paper sensor. Threshold
value is around peak.
(The threshold should be adjusted around middle
to detect paper
sensor/transmitive sensor fine adjust setting.)
・Available to detect by paper sensor. Threshold
value is
(The threshold should be adjusted around middle
to detect paper
sensor/transmitive sensor fine adjust setting.)
・ Not available to detect paper gap by paper
sensor. Sensor adjustment is necessary.
・ Not available to detect paper gap by paper
sensor. Sensor adjustment is necessary.
(Threshold <= Base)
・Not available to detect by paper sensor.
(The paper gap can be detected by calibration but
is very difficult level.)
6- 10
6.1 THRESHOLD SETTING
correctly in reflective
around base.
correctly in reflective
EO18-33027