Toshiba B-EX4 Maintenance Manual page 34

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
6. Re-attach the Rewinder Motor Cover with the two screws, and pass the Rewind Full Sensor Harness to
the other side of the Main Frame through the hole.
Rewinder Motor Cover
7. From the MAIN PC board side, unfold the tabs of the Blind Plate (See Step 4), then pull and remove the
Blind Plate.
Main Frame
8. Tilt the Rewinder Ass'y forward to avoid the Supply Holder, and put it against the main frame, as shown
below.
Main Frame
Tab
4-19
(Revision Date: Aug. 24, 2011)
4.3 PEEL-OFF MODULE (B-EX904-H-QM-R)
Hole
Rewind Full Sensor
Harness
Supply Holder
Blind Plate
Supply Holder
Rewinder Ass'y
EO18-33027