5. SYSTEM MODE
5.4.1.6 Ribbon save / RBN SAVE
Tag / TAG Enable ribbon save function (Head open/close lever: Tag position)
・
Label / LABEL
・
Disable / OFF
・
(*1) If this setting is enabled when ribbon module is not mounted, ribbon may be slack and printer may
not print correctly. So, be careful for this setting.
Ribbon save function may not work correctly if lock position of actual head open/close lever is different
from this setting.
5.4.1.7 Pre peel-off / PRE PEEL OFF
Disable / OFF
・
Enable / ON
・
(*) Pre peel off is enabled regardless this setting if 10 ips is selected.
5.4.1.8 Back feed / BACK SPEED
Standard speed/ STD
・
Low speed / LOW
・
Enable ribbon save function (Head open/close lever: Label position))
Disable ribbon save function
Disable pre peel off
Enable pre peel off
3ips
2ips
5-26
EO18-33027
5.4 PARAMETER SETTING