4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
8. Connect the Interface Cable to J6 on the Main PC board.
9.
Re-install the Side Panel (L).
10. Attach the FCC ID Sticker to any available space of the printer back.
11. Refer to the Owner's Manual for the interface parameter settings.
(System Mode →<7>INTERFACE → NETWORK)
4.7 Wireless L AN BOARD (B-EX700-WLAN-QM-R)
J6
4-42
EO18-33027
(Revision Date: Aug. 24, 2011)
Main PC Board
Interface Cable