Toshiba B-EX4 Maintenance Manual page 77

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4.11.1 Removing the Covers
As the procedure is the same as that for the B-EX700-U2-US/EU/CN-R, refer to Section 4.10.1.
4.11.2 Attaching the Ribbon Guide
As the procedure is the same as that for the B-EX700-U2-US/EU/CN-R, refer to Section 4.10.2.
4.11.3 Attaching the Antenna to the Antenna Frame
1. Secure the Antenna to the Antenna Frame with the two SMW-3x25 screws with the spacers (long)
placed between the Antenna and the Antenna Frame.
SMW-3x25 Screw
Spacer (long)
2. Hold the Antenna Ass'y so that the Antenna Frame is on the upper side and the Plate A is on the right, as
viewed from the printer front. Fit the Antenna Ass'y to the bottom of the Platen Holder Block. .
Antenna
Antenna Frame
4.11 HF RFID MODULE MOUNT KIT (B-EX700-RFID-H1-QM-R)
Antenna
Antenna Frame
NOTE: Align the Antenna Ass'y with the four
slots enclosed with circles.
4-62
(Revision Date: Aug. 24, 2011)
SMW-3x25 Screw
Spacer (long)
Plate A
Platen Holder Block
EO18-33027