Toshiba B-EX4 Maintenance Manual page 60

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4.9 SERIAL INTERFACE BOARD (B-EX700-RS-QM-R)
The following parts are supplied with the kit. Make sure you have all items shown below.
Parallel Interface Board (1 pc.)
NOTE: This module cannot be used together with the B-EX700-WLAN-QM-R wireless LAN board.
1. Turn the printer power off and disconnect the Power Cord.
2. Remove the three B-4x5 screws from the Side Panel (L).
3. Slide the Side Panel (L) backward, and raise it to remove from the printer.
4. Unfold the upper and lower tabs of the Blind Plate indicated by the arrow, then pull and remove the
Blind Plate from the printer back.
M-3x6 Screw (2 pcs.)
B-4x5 Screw
Tab
4.9 SERIAL INTERFACE BOARD (B-EX700-RS-QM-R)
Installation Manual (1 copy)
B-4x5 Screw
Tab
4-45
(Revision Date: Aug. 24, 2011)
Side Panel (L)
Blind Plate
EO18-33027